Washer Toss

Go from build master to tournament master with one quick build. Each board features a handle, so you can easily transport the game. They also stack for out-of-the-way storage. Using just a few YellaWood® boards and some plywood, the game takes shape in a few steps.

This plan makes for an ideal weekend or even after-work project. Once the frame is constructed, a PVC section is attached to create the cup, a few finishing pieces are added, and everything is sanded and sealed. Buy a set of washers that go with this game, and you're ready to play!

Note: Washers not included

Before you get started, please read our info on safety, fasteners and building tips.

Before building, please consult our Terms of Use.

COST:

TIME: 3 Hrs

SKILL:

Materials

  • (2) 2" x 4" x 6'
  • (1) 36" x 18" x ½" plywood
  • ½ lb box 1-1½" exterior wood screws
  • (2) 4 ⅞" galvanized door pull
  • (2) 13" x 13" piece of carpet or felt
  • (1) 4" diameter PVC pipe at least 8" long

Cut List

  • A. (8) 1½ x 3½ x 16" w/ an angle cut at 45˚
  • B. (2) 16 x 16 x ½"
  • C. (2) 4 x 3½"

Tools

  • Chop saw (or hand or circular saw)
  • Table saw
  • Drill/driver
  • 1/8" Drill bit
  • Scissors
  • Square
  • Measuring tape
  • Utility knife
  • Sanding block
  • Wood glue
  • High-strength glue