Big Green Egg® Table

This custom table not only highlights a medium-sized Big Green Egg® but also provides extra work and storage space.

It features a shallow, built-in shelf to store grilling utensils, plates, etc. The legs are thin planks laid up to maximize their strength while remaining sleek.

First, construct the frame then move on to assembling the shelf and brace supports. Next, lay out surface planks and cut out the circle to fit the Big Green Egg®. After some light finishing, you'll be ready to grill in style all summer long.

Make sure to take proper safety precautions including always wearing gloves, goggles and a dust mask when you're cutting or sanding.

Note: Big Green Egg® is a registered trademark of Big Green Egg, Inc.

Before you get started, please read our info on safety, fasteners and building tips.

Before building, please consult our Terms of Use.

COST:

TIME: 9 Hrs

SKILL:

Materials

  • (4) 4 x 4 x 10' YellaWood® brand pressure treated pine
  • (4) 2 x 4 x 8' YellaWood® brand pressure treated pine
  • (14) 2 x 2 x 42" YellaWood® brand pressure treated pine deck balusters with bevels cut at both ends
  • (3) 1 x 6 x 8' YellaWood® brand pressure treated pine
  • 3" deck screws
  • 2" deck screws
  • 1 1/4" deck screws
  • (4) 1/8 x 4 1/2" galvanized bolts, flat washers and nuts
  • Waterproof wood glue

Cut List

  • A. (4) 3 1/2 x 3 1/2 x 96"
  • B. (4) 1 1/2 x 3 1/2 x 96"
  • C. (4) 3 1/2 x 3 1/2 x 24"
  • D. (14) 1 1/2 x 1 1/2 x 42"
  • E. (10) 3/4 x 1 x 31"
  • F. (4) 3/4 x 1 x 69"
  • G. (22) 3/4 x 1 x 15 1/2"
  • H. (12) 3/4 x 1 x 12"

Tools

  • Miter saw or circular saw
  • Table saw
  • 3/8" drill bit at least 5" long
  • 1 1/4" Forstner or spade bit
  • 1/8" drill bit
  • Carpenter framing square
  • Socket wrench set
  • Chisel
  • Driver
  • Damp rag to wipe up excess glue